Fast track your business with high speed ethernet
Data traffic is increasing all the time. Additional cloud workloads, new branch sites, collaboration tools and connected devices are putting more pressure on network performance and management.
Will your current network keep up with these new demands?
With National Ethernet you can add more bandwidth when it's required. You'll have the performance and coverage you need with the control and economy you want.
National Ethernet relies on Telstra's powerful Ethernet over fibre network. It gives you uncontended, highly available and low latency bandwidth on Australia's largest fibre network.
With our wider coverage, there's no need to have different providers to maintain your network availability. You also have the flexibility to connect your sites as one-to-one or one-to-many with redundancy options and can even set up a dual head-end topology.
Now you can ensure your applications perform at peak independently of your network provider. Access critical data in real-time. Move large workloads into public or private clouds with ease. All with the cost-efficiency of a Layer 2 solution.
You'll have full control. Choose from a range of speeds, Classes of Service, redundancy options and build your own MPLS network over Layer 2, using your Layer 3 devices to manage it.
High bandwidth and low latency over uncontended fibre.
Resilient networks with redundancy options.
Access Australia's largest fibre footprint, even into regional areas.
Manage your network operations.
Support critical operations
Super-low latency over uncontended fibre for peak application, cloud and backup performance.
Less than 6 minutes of downtime a year with our fully redundant option.
99.999% availability target.
Reach more places
Cover metropolitan and regional areas without the cost and complexity of multiple network vendors.
Connect the way you want
Connect sites either one-to-one, or one-to-many.
Link multiple sites without the additional cost of a layer 3 solution.
Stay in control
Use your own IP devices to manage routing.
Choose the sites you connect to
Optional dual head end redundancy
Consistent low latency
Latency lower than 5.68ms and jitter lower than 1ms (with 'expedite' class of service) between sites less than 160km apart.
For service with fully redundant access to each site. Telstra fibre single access at each site has 99.93% availability target.
3 Classes of Service
for Telstra fibre
Choose the class of service that
best suits your site needs
premium, prioritise and expedite.
Connect point-to-point and point-to-multipoint
Easily migrate between P2P and P2MP without major impact. Use standard ethernet-compatible equipment at your site.
Have full control of routing between your sites, plus options for consultancy services should you need Telstra expertise.
You can add sites with nbnTM or Telstra fibre access depending on availability and feasibility.
Some service options are currently unavailable for nbnTM access.
We operate one of the largest fibre networks in Australia
We offer unmatched coverage including dual routes to every capital city and extend into many regional and rural centres.
Service availability of up to 99.999%
We are the only provider in Australia to offer this service availability target for our fully redundant option.
Complete network separation
High data traffic on our IP-WAN and internet services will never impact your National Ethernet Service.
Service availability: Available service options depend on your location and will be confirmed through service qualification. Enterprise and commercial works at additional cost may be required to connect your sites to our network.
Speeds: Actual speeds experienced can vary due to various factors including your access type, your premises’ maximum line speed, hardware and software capability and configuration.
For more information please refer to the National Ethernet section of Our Customer Terms at https://www.telstra.com.au/customer-terms/business-government#data-services
nbn™ is a trademark of nbn co limited and used under licence.