Something went wrong. Please try again.

TP-Link Tapo Temperature & Humidity Sensor


    Choose your capacity


    Checking stock... In stock Out of stock Unavailable

    Choose how you'll pay here



    Accessory cost (interest free)
    Accessory cost


    Keep batteries away from children

    This product contains a button/coin battery and is hazardous. Keep batteries away from children. Batteries can cause severe or fatal injuries in 2 hours or less if swallowed or placed inside any part of the body. Medical attention should be sought immediately if it is suspected the battery has been swallowed or placed inside any part of the body. 

    Tapo Smart Temperature & Humidity Monitor

    • Fast & Accurate Monitoring - Detects temperature and humidity with high-accuracy Swiss-made sensor. Obtaining and update data every 2 seconds. (Accuracy: ±0.3 °C, ±3% RH)
    • Home Automation - Automatically turns on/off home electronics when settings fall outside their preset ranges.
    • Free Data Storage & Visual Graphics - Records temperature and humidity data and generates periodic data summaries.
    • App Notification Alerts - Receive instant alerts on your phone whenever levels fall outside preset ranges.
    • Smart Actions Support – Connect the actions with other smart devices for home automation.
    • Battery Powered – Battery-powered design with 1+ year battery life .
    • Flexible Installation - Hang it with a lanyard, attach it on a surface with an adhesive or magnet, or simply place it on a desk.
    • Device Sharing – Easily share management permissions with each member of your family.
    • Easy Setup and Use – Set up quickly and easily through the free Tapo app.

    Note: Hub Required- Tapo Smart IoT Hub (H100) is required

    Tapo Smart Temperature & Humidity Monitor

    • Wireless: 922 MHz (AU version)1Refer to legal disclaimers

    • Temperature Range: -20~60°C (-4~140°F)

    • Humidity Range: 0%~99%RH

    • Temperature Accuracy: ±0.3°C /±0.54°F; Up to ±0.2°C/ ±0.32°F from 5°C - 60°C / 41°F - 140°F

    • Humidity Accuracy: ±3%RH; Up to ±2%RH from20%RH - 80%RH @ 25°C / 77°F

    • Refresh Rate: 2 Seconds

    • Battery Life: 1 Year

    • Certifications: FCC, CE, R-NZ, UKCA, RoHS, JRF, VCCI, NCC, RCM

    • Operating Temperature: -20~60°C (-4~140°F)

    • Operating Humidity: 0%–99% RH

    • Dimensions: 46 × 46 × 12.3 mm

    Note: Hub Required- Tapo Smart IoT Hub (H100) is required

    Legal Disclaimers

    1. The specific working frequencies for US version are 920.9 MHz to 923.3 MHz.

    Currently, Alexa can only be used to check temperature, not humidity. Specifications are subject to change without notice. All brands and product names are trademarks or registered trademarks of their respective holders.

    Tapo Smart Temperature & Humidity Sensor (T310)

    • Tapo T310 Quick Start Guide
    • 1 x Lanyard 3M
    • 1 x Battery CR2450
    • 1 x Adhesive Eject Pin
    • 1 x Adhesive magnet