Something went wrong. Please try again.

TP-Link Tapo Smart Motion Sensor


    Choose your capacity


    Checking stock... In stock Out of stock Unavailable

    Choose how you'll pay here



    Accessory cost (interest free)
    Accessory cost


    Keep batteries away from children

    This product contains a button/coin battery and is hazardous. Keep batteries away from children. Batteries can cause severe or fatal injuries in 2 hours or less if swallowed or placed inside any part of the body. Medical attention should be sought immediately if it is suspected the battery has been swallowed or placed inside any part of the body. 

    Tapo Smart Motion Sensor

    • Wide Range Detection – Captures motion up to 23 ft.(7m) away and through 120° view.
    • Smart Actions – Activate your Tapo devices whenever motion is detected for security or home automation.
    • Motion-Activated Light – Control smart lights based on your movement and schedule.
    • Energy Saving – Automatically turn on connected smart devices when you come and go.
    • Instant Alerts & App Notification – Alerts you in Away Mode for anything you want to know. Triggers Hub alarm and sends you notifications via Tapo app whenever motion is detected.
    • Device Sharing – Easily share management permissions with each member of your family.
    • Battery-Powered – Compact battery-powered design supports over one year#Refer to legal disclaimersof use.
    • Easy Setup and Use – Set up quickly and easily through the free Tapo app.
    • Easy Installation – Mount it with attached 3M adhesive or supplied magnets.

    Note: Hub Required- Tapo Smart IoT Hub (H100) is required

    • Tapo Smart Motion Sensor

    • Max Detection Angle: 120°

    • Max Detection Distance: 7 m

    • Wireless: 922 MHz (AU version)1Refer to legal disclaimers

    • Notifications: Tapo Hub Alarm, Tapo App Notifications

    • Battery Life: 1 Year+2Refer to legal disclaimers

    • Certifications: FCC, CE, R-NZ, UKCA, RoHS, JRF, VCCI, NCC, RCM

    • Operating Temperature: 0 ºC– 40 ºC (32°F–104°F )

    • Operating Humidity: 10%–90%RH, Non-condensing

    • Dimensions: 42.3 × 42.3 ×34 mm

    Note: Hub Required- Tapo Smart IoT Hub (H100) is required

    Legal Disclaimers

    1. The specific working frequencies for AU version are 920.9 MHz to 923.3 MHz.
    2. Based on the testing of 100 triggers a day.

    Specifications are subject to change without notice. All brands and product names are trademarks or registered trademarks of their respective holders.

    • Tapo Smart Motion Sensor (T100)
    • Smart Sensor Tapo T100 Quick Start Guide
    • 1 x Battery CR2450
    • 1 x 3M Adhesive